Agba ojii nke agba onwe ya nke e sere agba ojii nke ụlọ ọrụ mmepụta ihe eji ejikọ eriri ígwè nke e ji ígwè ebuli ihe mkpuchi ígwè nke e ji ígwè ebuli ihe mkpuchi ígwè mee.
Agba ojii nke agba onwe ya nke e sere agba ojii nke ụlọ ọrụ mmepụta ihe eji ejikọ eriri ígwè nke e ji ígwè ebuli ihe mkpuchi ígwè nke e ji ígwè ebuli ihe mkpuchi ígwè mee.
Nkewa
Ibuli na ịpịa ihe, agbụ ígwè,agbụ njikọ dị mkpụmkpụ, ibuli agbụ njikọ gburugburu,Agbụ ígwè ọkwa T, agbụ ígwè ọkwa DAT,Ọkwa DT yinye, DIN EN 818-7njikọ njikọ dị mkpirikpi maka ebumnuche ibuli elu,agbụ ígwè nnabata dị mma,agbụ ígwè alloy
Ngwa
Ibuli na ịpịa ihe, ibuli ibu, ibuli ibu
Foto nke 1: agbụ / njikọ ibuli elu
Igodo
| 1 | Ahịrị etiti nke njikọ ahụ gafere ókèala | l | bụ ogologo ntụgharị ọtụtụ |
| p | ọ bụ egwuregwu ahụ | dm | bụ dayameta ihe ahụ dịka a tụrụ |
| ds | bụ dayameta nke weld | e | ogologo ọ na-emetụta nha nke ịgbado ọkụ |
| w3 | bụ obosara dị n'ime nke weld ahụ | w2 | bụ obosara mpụta n'elu weld ahụ |
Tebụl 1: nha agbụ ígwè / njikọ (mm)
| Nominal size dn | Material diamebighị ebitolerance | Pitch | Width | Gauge length of 11 x pn | Wubi diamebighị ebi ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individomenala link and thestandard gauge length. | ||||||||
Tebụl 2: oke ibu ọrụ nke agbụ ígwè ibu (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tebụl nke 3: ike nrụpụta agbụ ígwè ibuli elu na ike mgbawa
| Nominal size dn mm | Manufacturing proof force (MPF) kN mn'ime. | Breaking force (BF) kN mn'ime. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tebụl 4: ogologo kachasị elu na ike elu
|
| hoist chain types | ||
| T | DAT | DT | |
| Total ihe kachasị mmaimate ogologo ogen A%min | 10 | 10 | 5 |
| Surface harụbọchịs min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
